Table of Content
Bhansali Nickel Alloys is a notable producer, supplier, stockholder, and exporter of Super Duplex Steel 32750 Pipes in Italy, Pipe fittings, Flanges, Forged Fittings, Round Bars, Plates, Filler Wire and Fasteners in Rome, Italy. We manufacture these Super Duplex Steel 32750 Pipe Fittings and Pipes using high-quality raw materials and modern technology equipment under the guidance of our qualified professionals in accordance with national and international accepted quality requirements. We stock these Super Duplex Steel 32760 Flanges and Forged Fittings in various sizes, thickness, configurations and also in customized configurations as per the requirements of the client at the most reasonable prices across Naples, Italy. Because of the high-quality raw materials and expert producing methods, we produce these products and export these across the regions of Milan, Italy.
Super Duplex Steel S32750/S32760 Pipe
Super Duplex Steel S32750/S32760 Pipe
Super Duplex Steel S32750/S32760 Flanges
Super Duplex Steel S32750/S32760 Forged Fittings
Super Duplex Steel S32750/S32760 Round Bar
Super Duplex Steel S32750/S32760 Plates
Super Duplex Steel S32750/S32760 Fasteners
Super Duplex Steel S32750/S32760 Filler Wire
Super Duplex Steel 32750 Flanges and Forged Fittings are utilized in highly corrosive environments and situations where high durability is required. High molybdenum, chromium and nitrogen content help Super Duplex Steel 32750 Forged Fittings and Flanges withstand pitting and crevice corrosion and also to resist stress corrosion cracking, erosion corrosion, corrosion fatigue, and general corrosion resistance in acids. Super Duplex Steel S32750 Plates, Round Bars and Fasteners utilized in a variety of applications like Power Generation, Marine Equipment, Chemical Processing Equipment, Pulp and paper, Water desalinization, Storage vessels, Oil and gas production, Hydraulic piping, etc.
Super Duplex Steel S32760 Round Bars, Plates, and Super Duplex Steel S3260 Fasteners have superior corrosion resistance to a wide range of conditions, particularly resistance to pitting and crevice corrosion in seawater and other chloride containing environments, with critical pitting temperature that is more than 122 degrees F. Super Duplex Steel 32760 Filler Wire exhibit features such as durability, good formability, extended lifecycle, impact strength at both ambient and sub-zero temperatures, and cost effective. Super Duplex Steel 32760 Flanges and Forged Fittings used in a variety of industries such as caustic evaporators, Equipment handling organic & fatty acids, Oil & Gas industry, subsea equipment, flue gas desulphurization, Pulp & paper industry components, desalination plants, Food processing plant, Agrochemicals production, Sewage treatment, etc.
We at Bhansali Nickel Alloys aim to provide only outstanding quality of the Super Duplex Steel 32750 Pipes and Pipe Fittings that are reliable for uses in various industries. Hence, we conduct various comprehensive testing on our Super Duplex Steel 32760 Pipes and Pipe Fittings before final delivery. Some of the tests include 100% radiography, raw material test, and flaring test, intergranular corrosion test, chemical analysis and Positive Material Identification testing. We provide certain quality documents with our Round Bars, Plates, and Fasteners that assure the quality of our Super Duplex Steel 32750 Flanges and Forged Fittings these include Raw Materials Test Certificate, 100% Radiography Test Report, Third Party Inspection Report, Material Traceability Report, Guarantee Letter, etc. We supply these to several cities across the Italy. Some of the cities that we export these products to are Genoa, Palermo, Turin, etc.
| Specifications | ASTM A790 / ASME SA 790 |
|---|---|
| Outer Diameter | 6.00 mm OD up to 250 mm OD, Sizes up to 12” NB |
| Welded Pipe size | 5.0 mm – 1219.2 mm |
| EFW Pipe size | 5.0 mm – 1219.2 mm |
| Pipe Thickness | 0.3mm – 50 mm |
| Schedule | SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS |
| Form | Round, Square, Hollow, Rectangular, Hydraulic, Coiled, Straight Pipes, “U” Shape, Pan Cake Coils etc. |
| End | Plain End, Beveled End, Treaded Pipe. |
| Type | Seamless / ERW / EFW / Welded |
| Specifications | ASTM A815/ ASME SA815 |
|---|---|
| Size | Seamless Butt Weld Fittings : 1/2″ – 10″ Welded Butt Weld Fittings : 1/2″ – 48″ |
| Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10 |
| Types | Seamless/Welded |
| Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom ASTM A815 Grade S31803 Pipe Fitting |
| Specification | ASTM A182 / ASME SA182 |
|---|---|
| Size | 1/2″ (15 NB) to 48″ (1200NB) DN10~DN5000 |
| Standards | ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc. |
| Pressure Rating ANSI | Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS |
| Connect Type/ Flange Face Type | Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ) |
| Specifications | ASTM A182/ ASME SA182 |
|---|---|
| Size | 1/8” NB to 4” NB (Socketweld & Screwed-Threaded) |
| Dimensions | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
| Types | Socketweld Fittings, Screwed-Threaded Fittings |
| Class | 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS |
| Standard | ASTM A276, A479 / ASME SA276, A479 |
|---|---|
| Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Size | 10 mm To 100 mm Dia in 100 mm TO 6000 mm Length |
| Form | Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging Etc |
| Finish | Bright, Polish & Black |
| Specifications | ASTM A240 / ASME SA240 |
|---|---|
| Dimension Standard | MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc |
| Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Thickness | 0.3 mm to 120 mm |
| Finish | Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc. |
| Form | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc. |
| Standard | DIN, ASTM, BS and all International Standards |
|---|---|
| Bolt / Screw Size | M3 – M56 | 3/6″ to 2″ | Custom Sizes |
| Nuts Size | M3 – M56 | 3/6″ to 2″ | Custom Sizes |
| Washers Size | M3 – M56 | 3/6″ to 2″ | Custom Sizes |
| Machine Screws Size | M1.6 – M12 |
| Self Tapping Screw Size | No.2 – No. 14 |
| Length | 3 mm to 200 mm |
| Types | Nuts, Bolts, Screws, Stud Bolts, Washers |
| Specification | ASTM A276 / ASME SA276 |
|---|---|
| Size | Dia 6mm to 300mm (100mm to 1200mm long) |
| Diameter | 5.5 – 400 mm |
| Length | Max 12000 mm |
| Types | Wire, Coil Wire, Filler wire, Welding wire etc |
| STANDARD | WERKSTOFF NR. | UNS |
| Super Duplex 2507 Pipe | 1.4410 | S32750 / S32760 |
| Grade | C | N | P | Si | Mn | Mo | Fe | Cr | S | Ni |
|---|---|---|---|---|---|---|---|---|---|---|
| S32750 | 0.030 max | 0.24 – 0.32 | 0.035 max | 0.80 max | 1.20 max | 3.00 – 5.00 | – | 24.00 – 26.00 | 0.020 max | 6.00 – 8.00 |
| S32760 | 0.05 max | 0.20 – 0.30 | 0.030 max | 1.00 max | 1.00 max | 3.00 – 4.00 | – | 24.00 – 26.00 | 0.010 max | 6.00 – 8.00 |
| Grade | Pipe Density | Pipe Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
|---|---|---|---|---|---|
| Super Duplex S32750 /S32760 | 7.8 g/cm3 | 1350 °C (2460 °F) | Psi – 80000 , MPa – 550 | Psi – 116000 , MPa – 800 | 15 % |
| Super Duplex S32760 Steel Pipe Manufacturer in Italy | UNS S32750 Super Duplex Seamless Pipes Supplier in Italy |
| Welded Super Duplex S32760 Stainless Steel Pipe Fittings in Italy | Seamless Super Duplex Stainless Steel S32760 Seamless Pipe Fittings in Italy |
| Super Duplex S32760 Buttweld Pipe Fittings in Palermo | S32760 Super Duplex Steel Pipe Elbow Supplier in Genoa |
| S32760 Super Duplex Steel Reducer Stockist in Milan | Super Duplex Stainless Steel S32760 Pipe Cap in Naples |
| Super Duplex Stainless Steel S32750 Pipe Bend Dealer in Rome | S32760 Stainless Steel Stub End Price in Italy |
| S32760 Super Duplex Steel Flanges Supplier in Italy | 1.4410 Super Duplex Slip on Flange stockist in Genoa |
| Super Duplex S32760 Stainless Steel Welding Neck Flange supplier Italy | Super Duplex S32760 Blind Flanges Manufacturers in Naples |
| S32760 Super Duplex Steel Lap Joint Flanges in Turin | S32760 Stainless Steel Round Bar in Italy |
| UNS S32750 Stainless Steel Flat Bar Dealer in Milan | S32760 Stainless Steel Hex Bar in Genoa |
| Super Duplex S32760 Forged Bar Supplier in Naples | S32760 Super Duplex Steel Forged Fittings Supplier in Italy |
| Super Duplex S32750 Forged Elbow Supplier in Turin | Super Duplex S32760 Coupling Supplier in Milan |
| Super Duplex S32760 Fasteners Distributors in Italy | S32760 Super Duplex Steel Bolts Supplier in Milan |
| Super Duplex 1.4410 Plates Supplier in Italy | S32750 Super Duplex Stainless Steel Sheets in Naples |
| Super Duplex 1.4410 Nuts Supplier in Genoa | S32760 Super Duplex Steel Filler Wire in Turin |
| Super Duplex S32760 Forged Bushing Supplier in Italy | S32760 Super Duplex Steel Supplier in Palermo |
| Super Duplex Steel S32750 Welding Wire Supplier in Italy | Super Duplex S32760 Forged Union in Milan |
Country
Super Duplex 2507 Pipe applications & uses
Address
