Table of Content
Bhansali Nickel Alloys is a prominent manufacturer, supplier, stockholder, and exporter of Duplex Steel 2205, 31803 Pipes, Pipe fittings, Flanges, Forged Fittings, Round Bars, Plates, Fasteners and Filler Wire in Doha, Qatar. We manufacture these Duplex Steel 2205 Round Bars, Plates, and Fasteners using high-quality raw materials and modern technology equipment under the guidance of our qualified professionals in accordance with globally approved quality requirements. We supply these Duplex Steel 31803 Flanges and Forged Fittings in different sizes, length, specifications and also in custom made configurations as per the demands of the client at the most reasonable prices across Dukhan, Qatar.
Duplex Steel 31803/2205 Pipe
Duplex Steel 31803/2205 Pipe
Duplex Steel 31803/2205 Flanges
Duplex Steel 31803/2205 Forged Fittings
Duplex Steel 31803/2205 Round Bar
Duplex Steel 31803/2205 Plates
Duplex Steel 31803/2205 Fasteners
Duplex Steel 31803/2205 Filler Wire
Duplex Steel UNS S31803 Flanges and Forged Fittings can be used in the oil & gas industry on flexible pipes for the extraction of oil, it can also be applied on chemical storage tanks as well as on equipment for pulp and paper segment. Duplex Steel Welding Wire combine good mechanical strength typically up to over 480 MPa yield strength and strength with moderate to good resistance to corrosion in a range of environments and also immune to sulphide stress corrosion cracking. Duplex Steel UNS S31803 Pipes and Pipe Fittings are used in applications where higher mechanical strength, lower weight and resistance to stress corrosion cracking is required
Duplex stainless steel UNS S32205 Round Bars, Plates, and Fasteners are utilized widely in applications that require outstanding resistance to corrosion, durability, resists localized corrosion types such as intergranular corrosion, crevice and pitting corrosion. Duplex stainless steel 2205 Pipes and Pipe Fittings are resistant to chloride stress corrosion cracking (SCC) at temperatures of 150 degrees C, outstanding oxidation resistance characteristics above 300 degrees C, good weldability, formability, and toughness. Duplex stainless steel 2205 is utilized for a wide range of applications such as Oil and gas exploration, Transport, storage and chemical processing High chloride and marine environments, Paper machines, liquor tanks, Offshore Drilling, Heat Exchangers, etc.
Because of the superior quality raw materials and expert producing methods, we produce these products and export these across the regions of Al Wakrah, Qatar. At Bhansali Nickel Alloys our aim is to supply only outstanding quality of the Duplex Steel 31803 Flanges and Forged Fittings that are suitable for uses in numerous industries. Hence, we undertake numerous detailed testing on our Duplex Steel 31803 Flanges and Forged Fittings before final delivery. Some of the tests include 100% radiography, macro/micro test, and flattening test, intergranular corrosion test, chemical analysis and PMI testing. We deliver certain quality documents with our Round Bars, Plates, and Fasteners that guarantee the quality of our Duplex Steel 2205 Flanges and Forged Fittings these include Raw Materials Test Certificate, 100% Radiography Test Report, Third Party Inspection Report, Material Traceability Report, Guarantee Letter, etc. We export these to various cities across the Qatar. Some of the cities that we supply these products to are Al Khor, Mesaieed, Ras Laffan, etc.
| Specifications | ASTM A790 / ASME SA 790 |
|---|---|
| Outer Diameter | 6.00 mm OD up to 250 mm OD, Sizes up to 12” NB |
| Welded Pipe size | 5.0 mm – 1219.2 mm |
| EFW Pipe size | 5.0 mm – 1219.2 mm |
| Pipe Thickness | 0.3mm – 50 mm |
| Schedule | SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS |
| Form | Round, Square, Hollow, Rectangular, Hydraulic, Coiled, Straight Pipes, “U” Shape, Pan Cake Coils etc. |
| End | Plain End, Beveled End, Treaded Pipe. |
| Type | Seamless / ERW / EFW / Welded |
| Specifications | ASTM A815/ ASME SA815 |
|---|---|
| Size | Seamless Butt Weld Fittings : 1/2″ – 10″ Welded Butt Weld Fittings : 1/2″ – 48″ |
| Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10 |
| Types | Seamless/Welded |
| Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom ASTM A815 Grade S31803 Pipe Fitting |
| Specification | ASTM A182 / ASME SA182 |
|---|---|
| Size | 1/2″ (15 NB) to 48″ (1200NB) DN10~DN5000 |
| Standards | ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc. |
| Pressure Rating ANSI | Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS |
| Connect Type/ Flange Face Type | Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ) |
| Specifications | ASTM A182/ ASME SA182 |
|---|---|
| Size | 1/8” NB to 4” NB (Socketweld & Screwed-Threaded) |
| Dimensions | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
| Types | Socketweld Fittings, Screwed-Threaded Fittings |
| Class | 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS |
| Standard | ASTM A276, A479 / ASME SA276, A479 |
|---|---|
| Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Size | 10 mm To 100 mm Dia in 100 mm TO 6000 mm Length |
| Form | Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging Etc |
| Finish | Bright, Polish & Black |
| Specifications | ASTM A240 / ASME SA240 |
|---|---|
| Dimension Standard | MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc |
| Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Thickness | 0.3 mm to 120 mm |
| Finish | Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc. |
| Form | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc. |
| Standard | DIN, ASTM, BS and all International Standards |
|---|---|
| Bolt / Screw Size | M3 – M56 | 3/6″ to 2″ | Custom Sizes |
| Nuts Size | M3 – M56 | 3/6″ to 2″ | Custom Sizes |
| Washers Size | M3 – M56 | 3/6″ to 2″ | Custom Sizes |
| Machine Screws Size | M1.6 – M12 |
| Self Tapping Screw Size | No.2 – No. 14 |
| Length | 3 mm to 200 mm |
| Types | Nuts, Bolts, Screws, Stud Bolts, Washers |
| Specification | ASTM A276 / ASME SA276 |
|---|---|
| Size | Dia 6mm to 300mm (100mm to 1200mm long) |
| Diameter | 5.5 – 400 mm |
| Length | Max 12000 mm |
| Types | Wire, Coil Wire, Filler wire, Welding wire etc |
| STANDARD | WERKSTOFF NR. | UNS |
| Duplex 2205 Pipe | 1.4462 | S31803 / S32205 |
| Grade | C | N | P | Si | Mn | Mo | Fe | Cr | S | Ni |
|---|---|---|---|---|---|---|---|---|---|---|
| S31803 | 0.030 max | 0.14 – 0.20 | 0.030 max | 1.00 max | 2.00 max | 3.0 – 3.5 | – | 22.0 – 23.0 | 0.020 max | Bal |
| S32205 | 0.030 max | 0.8 – 0.20 | 0.030 max | 1.00 max | 2.00 max | 2.50 – 3.50 | – | 21.0 – 23.0 | 0.020 max | Bal |
| Grade | Pipe Density | Pipe Melting Point | Yield Strength (0.2%Offset) | 2205 Duplex SS Pipe Tensile Strength | Elongation |
|---|---|---|---|---|---|
| Duplex S31803/S32205 | 7.8 g/cm3 | 1350 °C (2460 °F) | Psi – 80000 , MPa – 550 | Psi – 116000 , MPa – 800 | 15 % |
| Duplex 2205 Steel Pipe Manufacturer in Qatar | UNS S31803 Duplex Seamless Pipes Supplier in Qatar |
| Welded Duplex 2205 Stainless Steel Pipe Fittings in Qatar | Seamless Duplex Stainless Steel 2205 Seamless Pipe Fittings in Qatar |
| SAF 2205 Buttweld Pipe Fittings in Mesaieed | 32205 Duplex Steel Pipe Elbow Supplier in Ras Laffan |
| 2205 Duplex Steel Reducer Stockist in Dukhan | Duplex Stainless Steel 32205 Pipe Cap in Al Wakrah |
| Duplex Stainless Steel 31803 Pipe Bend Dealer in Doha | 2205 Stainless Steel Stub End Price in Qatar |
| 2205 Duplex Steel Flanges Supplier in Qatar | 1.4462 Duplex Slip on Flange stockist in Ras Laffan |
| Duplex 2205 Stainless Steel Welding Neck Flange supplier Qatar | SAF 2205 Blind Flanges Manufacturers in Al Wakrah |
| 32205 Duplex Steel Lap Joint Flanges in Al Khor | S31803 Stainless Steel Round Bar in Qatar |
| UNS S31803 Stainless Steel Flat Bar Dealer in Dukhan | S32205 Stainless Steel Hex Bar in Ras Laffan |
| Duplex 2205 Forged Bar Supplier in Al Wakrah | SAF 2205 Duplex Steel Forged Fittings Supplier in Qatar |
| Duplex S31803 Forged Elbow Supplier in Al Khor | Duplex 32205 Coupling Supplier in Dukhan |
| Duplex 2205 Fasteners Distributors in Qatar | 32205 Duplex Steel Bolts Supplier in Dukhan |
| Duplex 1.4462 Plates Supplier in Qatar | 31803 Duplex Stainless Steel Sheets in Al Wakrah |
| Duplex 1.4462 Nuts Supplier in Ras Laffan | 32205 Duplex Steel Filler Wire in Al Khor |
| Duplex 2205 Forged Bushing Supplier in Qatar | S32205 Duplex Steel Supplier in Mesaieed |
| Duplex Steel S31803 Welding Wire Supplier in Qatar | Duplex 2205 Forged Union in Dukhan |
Country
Duplex 2205 Pipe applications & uses
Address
