Table of Content
Bhansali Nickel Alloys is a prominent manufacturer, distributor, stockist, and exporter of Duplex Steel 2205, 31803 Pipes, Pipe fittings, Flanges, Forged Fittings, Round Bars, Plates, Fasteners and Filler Wire in Jakarta, Indonesia. We manufacture these Duplex Steel 2205 Flanges and Forged Fittings making use of superior quality raw materials and modern technology equipment under the guidance of our professional team in accordance with national and international accepted quality requirements. We stock these Duplex Steel 2205 Pipes and Pipe Fittings in different sizes, length, configurations and also in customized configurations as per the needs of the customer at the most affordable prices across Surabaya, Indonesia.
Duplex Steel 31803/2205 Pipe
Duplex Steel 31803/2205 Pipe
Duplex Steel 31803/2205 Flanges
Duplex Steel 31803/2205 Forged Fittings
Duplex Steel 31803/2205 Round Bar
Duplex Steel 31803/2205 Plates
Duplex Steel 31803/2205 Fasteners
Duplex Steel 31803/2205 Filler Wire
Duplex Steel UNS S31803 Flanges and Forged Fittings can be utilized in the oil & gas industry on flexible pipes for the extraction of oil, it can also be utilized on chemical storage tanks as well as on equipment for pulp and paper segment. Duplex Steel Filler Wire combine outstanding mechanical strength typically up to over 480 MPa yield strength and strength with moderate to good corrosion resistance in a range of conditions and also immune to sulphide stress corrosion cracking. Duplex Steel UNS S31803 Round Bars, Plates, and Fasteners are used in industries where higher mechanical strength, lower weight and resistance to stress corrosion cracking is needed
Duplex stainless steel UNS S32205 Round Bars, Plates, and Fasteners are utilized extensively in applications that need good corrosion resistance, strength, immune to localized corrosion types such as intergranular corrosion, crevice and pitting corrosion. Duplex stainless steel 2205 Round Bars, Plates, and Fasteners are resistant to chloride stress corrosion cracking (SCC) at temperatures of 300 degrees F, outstanding oxidation resistance characteristics above 570 degrees F, good weldability, formability, and toughness. Duplex stainless steel 2205 is used for a wide variety of applications like Oil and gas exploration, Processing equipment High chloride and marine environments, Pulp and Paper Industry, Offshore Drilling, Heat Exchangers, etc.
Because of the high-quality raw materials and expert manufacturing methods, we design these products and export these in all the regions of Bandung, Indonesia. At Bhansali Nickel Alloys our objective is to supply only excellent quality of the Duplex Steel 2205 Round Bars, Plates, and Fasteners that are reliable for applications in numerous industries. Hence, we carry several detailed testing on our Duplex Steel 31803 Pipes and Pipe Fittings before final delivery. Some of the tests include 100% radiography, macro/micro test, and flaring test, intergranular corrosion test, chemical analysis and PMI testing. We deliver certain tests certificates with our Round Bars, Plates, and Fasteners that assure the quality of our Duplex Steel 2205 Round Bars, Plates, and Fasteners these include Raw Materials Test Certificate, 100% Radiography Test Report, Third Party Inspection Report, Material Traceability Report, Guarantee Letter, etc. We export these to various regions across the Indonesia. Some of the regions that we export these products to are Medan, Lampung, Banten, etc.
| Specifications | ASTM A790 / ASME SA 790 |
|---|---|
| Outer Diameter | 6.00 mm OD up to 250 mm OD, Sizes up to 12” NB |
| Welded Pipe size | 5.0 mm – 1219.2 mm |
| EFW Pipe size | 5.0 mm – 1219.2 mm |
| Pipe Thickness | 0.3mm – 50 mm |
| Schedule | SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS |
| Form | Round, Square, Hollow, Rectangular, Hydraulic, Coiled, Straight Pipes, “U” Shape, Pan Cake Coils etc. |
| End | Plain End, Beveled End, Treaded Pipe. |
| Type | Seamless / ERW / EFW / Welded |
| Specifications | ASTM A815/ ASME SA815 |
|---|---|
| Size | Seamless Butt Weld Fittings : 1/2″ – 10″ Welded Butt Weld Fittings : 1/2″ – 48″ |
| Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10 |
| Types | Seamless/Welded |
| Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom ASTM A815 Grade S31803 Pipe Fitting |
| Specification | ASTM A182 / ASME SA182 |
|---|---|
| Size | 1/2″ (15 NB) to 48″ (1200NB) DN10~DN5000 |
| Standards | ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc. |
| Pressure Rating ANSI | Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS |
| Connect Type/ Flange Face Type | Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ) |
| Specifications | ASTM A182/ ASME SA182 |
|---|---|
| Size | 1/8” NB to 4” NB (Socketweld & Screwed-Threaded) |
| Dimensions | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
| Types | Socketweld Fittings, Screwed-Threaded Fittings |
| Class | 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS |
| Standard | ASTM A276, A479 / ASME SA276, A479 |
|---|---|
| Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Size | 10 mm To 100 mm Dia in 100 mm TO 6000 mm Length |
| Form | Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging Etc |
| Finish | Bright, Polish & Black |
| Specifications | ASTM A240 / ASME SA240 |
|---|---|
| Dimension Standard | MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc |
| Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Thickness | 0.3 mm to 120 mm |
| Finish | Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc. |
| Form | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc. |
| Standard | DIN, ASTM, BS and all International Standards |
|---|---|
| Bolt / Screw Size | M3 – M56 | 3/6″ to 2″ | Custom Sizes |
| Nuts Size | M3 – M56 | 3/6″ to 2″ | Custom Sizes |
| Washers Size | M3 – M56 | 3/6″ to 2″ | Custom Sizes |
| Machine Screws Size | M1.6 – M12 |
| Self Tapping Screw Size | No.2 – No. 14 |
| Length | 3 mm to 200 mm |
| Types | Nuts, Bolts, Screws, Stud Bolts, Washers |
| Specification | ASTM A276 / ASME SA276 |
|---|---|
| Size | Dia 6mm to 300mm (100mm to 1200mm long) |
| Diameter | 5.5 – 400 mm |
| Length | Max 12000 mm |
| Types | Wire, Coil Wire, Filler wire, Welding wire etc |
| STANDARD | WERKSTOFF NR. | UNS |
| Duplex 2205 Pipe | 1.4462 | S31803 / S32205 |
| Grade | C | N | P | Si | Mn | Mo | Fe | Cr | S | Ni |
|---|---|---|---|---|---|---|---|---|---|---|
| S31803 | 0.030 max | 0.14 – 0.20 | 0.030 max | 1.00 max | 2.00 max | 3.0 – 3.5 | – | 22.0 – 23.0 | 0.020 max | Bal |
| S32205 | 0.030 max | 0.8 – 0.20 | 0.030 max | 1.00 max | 2.00 max | 2.50 – 3.50 | – | 21.0 – 23.0 | 0.020 max | Bal |
| Grade | Pipe Density | Pipe Melting Point | Yield Strength (0.2%Offset) | 2205 Duplex SS Pipe Tensile Strength | Elongation |
|---|---|---|---|---|---|
| Duplex S31803/S32205 | 7.8 g/cm3 | 1350 °C (2460 °F) | Psi – 80000 , MPa – 550 | Psi – 116000 , MPa – 800 | 15 % |
| Duplex 2205 Steel Pipe Manufacturer in Indonesia | UNS S31803 Duplex Seamless Pipes Supplier in Indonesia |
| Welded Duplex 2205 Stainless Steel Pipe Fittings in Indonesia | Seamless Duplex Stainless Steel 2205 Seamless Pipe Fittings in Indonesia |
| SAF 2205 Buttweld Pipe Fittings in Lampung | 32205 Duplex Steel Pipe Elbow Supplier in Banten |
| 2205 Duplex Steel Reducer Stockist in Surabaya | Duplex Stainless Steel 32205 Pipe Cap in Bandung |
| Duplex Stainless Steel 31803 Pipe Bend Dealer in Jakarta | 2205 Stainless Steel Stub End Price in Indonesia |
| 2205 Duplex Steel Flanges Supplier in Indonesia | 1.4462 Duplex Slip on Flange stockist in Banten |
| Duplex 2205 Stainless Steel Welding Neck Flange supplier Indonesia | SAF 2205 Blind Flanges Manufacturers in Bandung |
| 32205 Duplex Steel Lap Joint Flanges in Medan | S31803 Stainless Steel Round Bar in Indonesia |
| UNS S31803 Stainless Steel Flat Bar Dealer in Surabaya | S32205 Stainless Steel Hex Bar in Banten |
| Duplex 2205 Forged Bar Supplier in Bandung | SAF 2205 Duplex Steel Forged Fittings Supplier in Indonesia |
| Duplex S31803 Forged Elbow Supplier in Medan | Duplex 32205 Coupling Supplier in Surabaya |
| Duplex 2205 Fasteners Distributors in Indonesia | 32205 Duplex Steel Bolts Supplier in Surabaya |
| Duplex 1.4462 Plates Supplier in Indonesia | 31803 Duplex Stainless Steel Sheets in Bandung |
| Duplex 1.4462 Nuts Supplier in Banten | 32205 Duplex Steel Filler Wire in Medan |
| Duplex 2205 Forged Bushing Supplier in Indonesia | S32205 Duplex Steel Supplier in Lampung |
| Duplex Steel S31803 Welding Wire Supplier in Indonesia | Duplex 2205 Forged Union in Surabaya |
Country
Duplex 2205 Pipe applications & uses
Address
