Table of Content
Bhansali Nickel Alloys is a prominent producer, distributor, stockist, and exporter of Duplex Steel 2205, 31803 Pipes, Pipe fittings, Flanges, Forged Fittings, Round Bars, Plates, Fasteners and Filler Wire in Cairo, Egypt. We produce these Duplex Steel 31803 Round Bars, Plates, and Fasteners making use of superior quality raw materials and modern technology equipment under the guidance of our professional team in accordance with national and international approved quality standards. We supply these Duplex Steel 31803 Pipes and Pipe Fittings in various dimensions, length, configurations and also in custom made configurations as per the demands of the customer at the most reasonable prices across Alexandria, Egypt.
Duplex Steel 31803/2205 Pipe
Duplex Steel 31803/2205 Pipe
Duplex Steel 31803/2205 Flanges
Duplex Steel 31803/2205 Forged Fittings
Duplex Steel 31803/2205 Round Bar
Duplex Steel 31803/2205 Plates
Duplex Steel 31803/2205 Fasteners
Duplex Steel 31803/2205 Filler Wire
Duplex Steel UNS S31803 Pipes and Pipe Fittings can be utilized in the oil & gas industry on flexible pipes for the extraction of oil, it can also be utilized on chemical storage tanks as well as on equipment for pulp and paper segment. Duplex Steel Filler Wire combine excellent mechanical strength typically up to over 480 MPa yield strength and ductility with moderate to good corrosion resistance in a variety of environments and also resistant to sour-gas environments. Duplex Steel UNS S31803 Round Bars, Plates, and Fasteners are used in applications where higher mechanical strength, lower weight and resistance to stress corrosion cracking is needed
Duplex stainless steel UNS S32205 Pipes and Pipe Fittings are utilized extensively in applications that need good corrosion resistance, durability, resists localized corrosion types like intergranular corrosion, crevice and pitting corrosion. Duplex stainless steel 2205 Round Bars, Plates, and Fasteners are resistant to chloride stress corrosion cracking (SCC) at temperatures of 300 degrees F, outstanding oxidation resistance property above 300 degrees C, good weldability, formability, and toughness. Duplex stainless steel 2205 is used for a wide range of industries like Oil and gas exploration, Processing equipment High chloride and marine environments, pulp and paper digesters, Offshore Drilling, Heat Exchangers, etc.
Because of the high-quality raw materials and expert producing methods, we manufacture these products and deliver these in all the regions of Giza, Egypt. At Bhansali Nickel Alloys our objective is to supply only outstanding quality of the Duplex Steel 2205 Round Bars, Plates, and Fasteners that are reliable for applications in numerous industries. Hence, we carry numerous comprehensive testing on our Duplex Steel 2205 Round Bars, Plates, and Fasteners before final delivery. Some of the tests include 100% radiography, raw material test, and flattening test, intergranular corrosion test, chemical analysis and PMI testing. We provide certain tests certificates with our Round Bars, Plates, and Fasteners that assure the quality of our Duplex Steel 2205 Pipes and Pipe Fittings these include Raw Materials Test Certificate, 100% Radiography Test Report, Third Party Inspection Report, Material Traceability Report, Guarantee Letter, etc. We supply these to various cities across the Egypt. Some of the cities that we supply these products to are Port Said, Suez, Luxor, etc.
| Specifications | ASTM A790 / ASME SA 790 |
|---|---|
| Outer Diameter | 6.00 mm OD up to 250 mm OD, Sizes up to 12” NB |
| Welded Pipe size | 5.0 mm – 1219.2 mm |
| EFW Pipe size | 5.0 mm – 1219.2 mm |
| Pipe Thickness | 0.3mm – 50 mm |
| Schedule | SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS |
| Form | Round, Square, Hollow, Rectangular, Hydraulic, Coiled, Straight Pipes, “U” Shape, Pan Cake Coils etc. |
| End | Plain End, Beveled End, Treaded Pipe. |
| Type | Seamless / ERW / EFW / Welded |
| Specifications | ASTM A815/ ASME SA815 |
|---|---|
| Size | Seamless Butt Weld Fittings : 1/2″ – 10″ Welded Butt Weld Fittings : 1/2″ – 48″ |
| Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10 |
| Types | Seamless/Welded |
| Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom ASTM A815 Grade S31803 Pipe Fitting |
| Specification | ASTM A182 / ASME SA182 |
|---|---|
| Size | 1/2″ (15 NB) to 48″ (1200NB) DN10~DN5000 |
| Standards | ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc. |
| Pressure Rating ANSI | Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS |
| Connect Type/ Flange Face Type | Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ) |
| Specifications | ASTM A182/ ASME SA182 |
|---|---|
| Size | 1/8” NB to 4” NB (Socketweld & Screwed-Threaded) |
| Dimensions | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
| Types | Socketweld Fittings, Screwed-Threaded Fittings |
| Class | 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS |
| Standard | ASTM A276, A479 / ASME SA276, A479 |
|---|---|
| Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Size | 10 mm To 100 mm Dia in 100 mm TO 6000 mm Length |
| Form | Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging Etc |
| Finish | Bright, Polish & Black |
| Specifications | ASTM A240 / ASME SA240 |
|---|---|
| Dimension Standard | MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc |
| Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Thickness | 0.3 mm to 120 mm |
| Finish | Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc. |
| Form | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc. |
| Standard | DIN, ASTM, BS and all International Standards |
|---|---|
| Bolt / Screw Size | M3 – M56 | 3/6″ to 2″ | Custom Sizes |
| Nuts Size | M3 – M56 | 3/6″ to 2″ | Custom Sizes |
| Washers Size | M3 – M56 | 3/6″ to 2″ | Custom Sizes |
| Machine Screws Size | M1.6 – M12 |
| Self Tapping Screw Size | No.2 – No. 14 |
| Length | 3 mm to 200 mm |
| Types | Nuts, Bolts, Screws, Stud Bolts, Washers |
| Specification | ASTM A276 / ASME SA276 |
|---|---|
| Size | Dia 6mm to 300mm (100mm to 1200mm long) |
| Diameter | 5.5 – 400 mm |
| Length | Max 12000 mm |
| Types | Wire, Coil Wire, Filler wire, Welding wire etc |
| STANDARD | WERKSTOFF NR. | UNS |
| Duplex 2205 Pipe | 1.4462 | S31803 / S32205 |
| Grade | C | N | P | Si | Mn | Mo | Fe | Cr | S | Ni |
|---|---|---|---|---|---|---|---|---|---|---|
| S31803 | 0.030 max | 0.14 – 0.20 | 0.030 max | 1.00 max | 2.00 max | 3.0 – 3.5 | – | 22.0 – 23.0 | 0.020 max | Bal |
| S32205 | 0.030 max | 0.8 – 0.20 | 0.030 max | 1.00 max | 2.00 max | 2.50 – 3.50 | – | 21.0 – 23.0 | 0.020 max | Bal |
| Grade | Pipe Density | Pipe Melting Point | Yield Strength (0.2%Offset) | 2205 Duplex SS Pipe Tensile Strength | Elongation |
|---|---|---|---|---|---|
| Duplex S31803/S32205 | 7.8 g/cm3 | 1350 °C (2460 °F) | Psi – 80000 , MPa – 550 | Psi – 116000 , MPa – 800 | 15 % |
| Duplex 2205 Steel Pipe Manufacturer in Egypt | UNS S31803 Duplex Seamless Pipes Supplier in Egypt |
| Welded Duplex 2205 Stainless Steel Pipe Fittings in Egypt | Seamless Duplex Stainless Steel 2205 Seamless Pipe Fittings in Egypt |
| SAF 2205 Buttweld Pipe Fittings in Suez | 32205 Duplex Steel Pipe Elbow Supplier in Luxor |
| 2205 Duplex Steel Reducer Stockist in Alexandria | Duplex Stainless Steel 32205 Pipe Cap in Giza |
| Duplex Stainless Steel 31803 Pipe Bend Dealer in Cairo | 2205 Stainless Steel Stub End Price in Egypt |
| 2205 Duplex Steel Flanges Supplier in Egypt | 1.4462 Duplex Slip on Flange stockist in Luxor |
| Duplex 2205 Stainless Steel Welding Neck Flange supplier Egypt | SAF 2205 Blind Flanges Manufacturers in Giza |
| 32205 Duplex Steel Lap Joint Flanges in Port Said | S31803 Stainless Steel Round Bar in Egypt |
| UNS S31803 Stainless Steel Flat Bar Dealer in Alexandria | S32205 Stainless Steel Hex Bar in Luxor |
| Duplex 2205 Forged Bar Supplier in Giza | SAF 2205 Duplex Steel Forged Fittings Supplier in Egypt |
| Duplex S31803 Forged Elbow Supplier in Port Said | Duplex 32205 Coupling Supplier in Alexandria |
| Duplex 2205 Fasteners Distributors in Egypt | 32205 Duplex Steel Bolts Supplier in Alexandria |
| Duplex 1.4462 Plates Supplier in Egypt | 31803 Duplex Stainless Steel Sheets in Giza |
| Duplex 1.4462 Nuts Supplier in Luxor | 32205 Duplex Steel Filler Wire in Port Said |
| Duplex 2205 Forged Bushing Supplier in Egypt | S32205 Duplex Steel Supplier in Suez |
| Duplex Steel S31803 Welding Wire Supplier in Egypt | Duplex 2205 Forged Union in Alexandria |
Country
Duplex 2205 Pipe applications & uses
Address
