Table of Content
Bhansali Nickel Alloys is notable producer, distributor, stockist and exporter of Inconel 600, 601, 625, 800, 825 Pipes, Pipe Fittings, Flanges, Forged Fittings, Round Bars, Plates, Fasteners, Welding Wires, Electrodes, and Filler Wires in Doha, Qatar. We manufacture these Pipes and Pipe Fittings using high quality raw materials and advanced technology machinery under the supervision of our professional team keeping in mind the national and international quality standards. We manufacture these products in various sizes, configurations, dimensions, types and also in customized configurations as per the demands of our valuable customer at the most reasonable prices. Inconel 800 Pipes and Pipe Fittings have excellent mechanical properties and has the suitable combination of superior toughness and excellent workability.
Inconel 600 / 601 / 625 / 800 / 825 Pipe
Inconel 600 / 601 / 625 / 800 / 825 Pipe
Inconel 600 / 601 / 625 / 800 / 825 Flanges
Inconel 600 / 601 / 625 / 800 / 825 Forged Fittings
Inconel 600 / 601 / 625 / 800 / 825 Round Bar
Inconel 600 / 601 / 625 / 800 / 825 Plates
Inconel 600 / 601 / 625 / 800 / 825 Fasteners
Inconel 600 / 601 / 625 / 800 / 825 Filler Wire
Inconel 600 Round Bars, Plates, and Fasteners demonstrate resistance to corrosion by many organic and inorganic compounds and also makes it virtually immune to chloride-ion stress-corrosion cracking. Inconel 600 Pipes and Pipe Fittings superior tensile toughness, good fabricability, and brazeability. Inconel 601 Round Bars, Plates, and Fasteners exhibit resistance to high temperature oxidation, remaining highly resistant to oxidation through 2200 degrees F,immune to spalling even under severe thermal cycling conditions, Highly immune to carburization, good creep rupture strength, Metallurgical stability, resistance to aqueous corrosion, superior mechanical strength, etc.
Inconel 625 Pipes and Pipe Fittings excellent choice for marine applications owing to its high corrosion-fatigue strength, outstanding tensile strength, and resistant to chloride-ion stress-corrosion cracking. Inconel 625 Flanges and Forged Fittings can be used in various applications like Chemical process equipment, Flue gas desulfurization scrubbers, Evaporators for wet-process phosphoric acid, etc. Incoloy 800 Flanges and Forged Fittings are immune to oxidation and carburization in high temperature conditions, show outstanding resistance to corrosion in many acidic environments, superior resistance to many sulfur-containing atmospheres, high temperature strength, superior creep rupture strength, etc.
Incoloy 825 Welding Electrode exhibit superior resistance to reducing and oxidizing acids, good resistance to stress-corrosion cracking, satisfactory resistant to localized corrosion, very resistance to sulfuric and phosphoric acids, superior mechanical properties at both room and elevated temperatures up to approximately 1000 degrees F, permission for pressure-vessel use at wall temperatures up to degrees F. Inconel 825 Round Bars, Plates, and Fasteners are used in various industries like Nuclear power plants, Industrial chemical evaporators, Heat treatment furnace parts, Vacuum furnace fixtures, Paper mill & alkaline digesters, Vinyl chloride monomer production, Catalyst regenerators in petrochemical production.
At Bhansali Nickel Alloys our objective is to provide only excellent quality of the Inconel 600 Welding Electrode that are reliable for uses in numerous industries. Hence, we carry various comprehensive testing on our Inconel 825 Round Bars, Plates, and Fasteners before final delivery. Some of the tests include 100% radiography, raw material test, and flaring test, intergranular corrosion test, chemical analysis and Positive Material Identification testing. We provide certain quality certificates with our Pipes and Pipe Fittings that assure the quality of our Inconel 800 Round Bars, Plates, and Fasteners these include Raw Materials Test Certificate, 100% Radiography Test Report, Third Party Inspection Report, Material Traceability Report, Guarantee Letter, etc. We supply these to several regions across the Qatar. Few of the cities that we deliver these products to are Dukhan, Al Wakrah, Al Khor, Ras Laffan, etc.
| Specifications | ASTM B167 B517 / ASME SB 167 SB 517 |
|---|---|
| Outer Diameter | 6.00 mm OD up to 250 mm OD, Sizes up to 12” NB |
| Welded Pipe size | 5.0 mm – 1219.2 mm |
| EFW Pipe size | 5.0 mm – 1219.2 mm |
| Pipe Thickness | 0.3mm – 50 mm |
| Schedule | SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS |
| Form | Round, Square, Hollow, Rectangular, Hydraulic, Coiled, Straight Pipes, “U” Shape, Pan Cake Coils etc. |
| End | Plain End, Beveled End, Treaded Pipe. |
| Type | Seamless / ERW / EFW / Welded |
| Specifications | ASTM B366 / ASME SB366 |
|---|---|
| Size | Seamless Butt Weld Fittings : 1/2″ – 10″ Welded Butt Weld Fittings : 1/2″ – 48″ |
| Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10 |
| Types | Seamless/Welded |
| Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom ASTM A815 Grade S31803 Pipe Fitting |
| Specification | ASTM B564 / ASME SB564 |
|---|---|
| Size | 1/2″ (15 NB) to 48″ (1200NB) DN10~DN5000 |
| Standards | ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc. |
| Pressure Rating ANSI | Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS |
| Connect Type/ Flange Face Type | Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ) |
| Specifications | ASTM B564 & ASME B564 |
|---|---|
| Size | 1/8” NB to 4” NB (Socketweld & Screwed-Threaded) |
| Dimensions | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
| Types | Socketweld Fittings, Screwed-Threaded Fittings |
| Class | 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS |
| Standard | ASTM B166, B466, B408, B425 / ASME SB166, B466, B408, B425 |
|---|---|
| Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Size | 10 mm To 100 mm Dia in 100 mm TO 6000 mm Length |
| Form | Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging Etc |
| Finish | Bright, Polish & Black |
| Specifications | ASTM B168, B443, B409, B424 / ASME SB168, B443, B409, B424 |
|---|---|
| Dimension Standard | MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc |
| Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Thickness | 0.3 mm to 120 mm |
| Finish | Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc. |
| Form | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc. |
| Standard | DIN, ASTM, BS and all International Standards |
|---|---|
| Bolt / Screw Size | M3 – M56 | 3/6″ to 2″ | Custom Sizes |
| Nuts Size | M3 – M56 | 3/6″ to 2″ | Custom Sizes |
| Washers Size | M3 – M56 | 3/6″ to 2″ | Custom Sizes |
| Machine Screws Size | M1.6 – M12 |
| Self Tapping Screw Size | No.2 – No. 14 |
| Length | 3 mm to 200 mm |
| Types | Nuts, Bolts, Screws, Stud Bolts, Washers |
| Specification | ASTM A276 / ASME SA276 |
|---|---|
| Size | Dia 6mm to 300mm (100mm to 1200mm long) |
| Diameter | 5.5 – 400 mm |
| Length | Max 12000 mm |
| Types | Wire, Coil Wire, Filler wire, Welding wire etc |
| STANDARD | WERKSTOFF NR. | UNS |
| Inconel 600 | N06600 | 2.4816 |
| Inconel 601 | N06601 | 2.4851 |
| Inconel 625 | N06625 | 2.4856 |
| Inconel 800 | N08800 | 1.4876 |
| Inconel 825 | N08801 | 2.4858 |
| Grade | C | Si | Mn | Cr | S | Ni |
|---|---|---|---|---|---|---|
| Inconel 600 | 0.15 max | 0.50 | 1.00 max | 14.00 – 17.00 | – | 72.00 min |
| Inconel 601 | 0.10 max | 0.50 max | 1.00 max | 21.0 – 25.0 | 0.015 max | 58.0 – 63.0 |
| Inconel 625 | 0.10 max | 0.50 max | 0.50 max | 20.0 – 23.0 | 0.015 max | 58.0 min |
| Inconel 800 | 0.10 max | 1.00 max | 1.50 max | 19.00 – 23.00 | 0.015 max | 30.00 – 35.00 |
| Inconel 825 | 0.05 max | 0.5 max | 1.00 max | 19.50 – 23.50 | 0.03 max | 38.00 – 46.00 |
| Grade | Pipe Density | Pipe Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
|---|---|---|---|---|---|
| Inconel 600 | 8.0 g/cm3 | 1399 °C (2550 °F) | Psi – 30000 , MPa – 205 | Psi – 75000 , MPa – 515 | 35% |
| Inconel 601 | 8.1 g/cm3 | 1411 °C (2571 °F) | Psi – 30,000 , MPa – 205 | Psi – 80,000 , MPa – 550 | 30 % |
| Inconel 625 | 8.4 g/cm3 | 1350 °C (2460 °F) | Psi – 75,000 , MPa – 517 | Psi – 1,35,000 , MPa – 930 | 42.5 % |
| Inconel 800 | 7.94 g/cm3 | 1385 °C (2525 °F) | Psi – 30,000 , MPa – 205 | Psi – 75,000 , MPa – 520 | 30 % |
| Inconel 825 | 8.14 g/cm3 | 1400 °C (2550 °F) | Psi – 32,000 , MPa – 220 | Psi – 80,000 , MPa – 550 | 30 % |
| Inconel 600 Pipe Manufacturer in Qatar | UNS N06625 Inconel Seamless Pipes Supplier in Qatar |
| Welded Incoloy 825 Pipe Fittings in Qatar | Seamless Inconel 625 Seamless Pipe Fittings in Qatar |
| Inconel 625 Buttweld Pipe Fittings in Doha | 800 Inconel Pipe Elbow Supplier in Dukhan |
| 625 Inconel Reducer Stockist in Dukhan | Inconel 600 Pipe Cap in Al Wakrah |
| Inconel 825 Pipe Bend Dealer in Dukhan | 625 Stub End Price in Qatar |
| 800 Inconel Flanges Supplier in Qatar | 1.4876 Inconel Slip on Flange stockist in Mesaieed |
| Inconel 601 Welding Neck Flange supplier Qatar | Inconel 825 Blind Flanges Manufacturers in Ras Laffan |
| 601 Inconel Lap Joint Flanges in Al Khor | 800 Incoloy Round Bar in Qatar |
| UNS N06625 Flat Bar Dealer in Al Wakrah | Inconel 601 Hex Bar in Doha |
| Inconel 601 Forged Bar Supplier in Ras Laffan | 600 Inconel Forged Fittings Supplier in Qatar |
| Inconel 825 Forged Elbow Supplier in Mesaieed | Inconel 800 Coupling Supplier in Al Khor |
| Inconel 601 Fasteners Distributors in Qatar | 600 Inconel Bolts Supplier in Mesaieed |
| Inconel 2.4856 Plates Supplier in Qatar | 625 Inconel Sheets in Ras Laffan |
| Inconel 2.4858 Nuts Supplier in Al Wakrah | 800 Incoloy Filler Wire in Al Khor |
| Inconel 600 Forged Bushing Supplier in Qatar | 601 Inconel Supplier in Ras Laffan |
| Inconel 625 Welding Wire Supplier in Qatar | Inconel 600 Forged Union in Doha |
Country
Inconel 600 / 601 / 625 / 800 / 825 Pipe applications & uses
Address
