Table of Content
Bhansali Nickel Alloys is leading manufacturer, distributor, stockist and exporter of Inconel 600, 601, 625, 800, 825 Pipes, Pipe Fittings, Flanges, Forged Fittings, Round Bars, Plates, Fasteners, Welding Wires, Electrodes, and Filler Wires in Jakarta, Indonesia. We manufacture these utilized in wide range of applications like Chemical process equipment, Flue gas desulfurization scrubbers, Evaporators for wet-process phosphoric acid, etc. Incoloy 800 Pipes and Pipe Fittings are immune to oxidation and carburization in high temperature conditions, exhibit good resistance to corrosion in many acidic environments, superior resistance to many sulfur-containing environments, elevated temperature toughness, high creep rupture strength, etc.
Inconel 600 / 601 / 625 / 800 / 825 Pipe
Inconel 600 / 601 / 625 / 800 / 825 Pipe
Inconel 600 / 601 / 625 / 800 / 825 Flanges
Inconel 600 / 601 / 625 / 800 / 825 Forged Fittings
Inconel 600 / 601 / 625 / 800 / 825 Round Bar
Inconel 600 / 601 / 625 / 800 / 825 Plates
Inconel 600 / 601 / 625 / 800 / 825 Fasteners
Inconel 600 / 601 / 625 / 800 / 825 Filler Wire
Incoloy 825 Filler Wire exhibit good resistance to reducing and oxidizing acids, outstanding resistance to stress-corrosion cracking, satisfactory resistant to localized corrosion, very resistance to sulfuric and phosphoric acids, superior mechanical characteristics at both room and high temperatures up to approximately 1000 degrees F, permission for pressure-vessel use at wall temperatures up to degrees F. Inconel 625 Pipes and Pipe Fittings are used in various industries such as Nuclear power plants, Industrial chemical evaporators, Heat treatment furnace parts, Vacuum furnace fixtures, Chemical & food processing equipment, Chemical processing equipment, Thermo couple sheathing in aggressive atmospheres.
At Bhansali Nickel Alloys our aim is to provide only excellent quality of the Inconel 825 Filler Wire that are suitable for uses in several industries. Hence, we undertake several comprehensive testing on our Inconel 825 Pipes and Pipe Fittings before final delivery. Some of the tests include 100% radiography, raw material test, and flattening test, intergranular corrosion test, chemical analysis and PMI testing. We supply certain quality certificates with our Round Bars, Plates, and Fasteners that guarantee the quality of our Inconel 600 Flanges and Forged Fittings these include Raw Materials Test Certificate, 100% Radiography Test Report, Third Party Inspection Report, Material Traceability Report, Guarantee Letter, etc. We export these to several regions across the Indonesia. Some of the cities that we supply these products to are Surabaya, Bandung, Medan, Banten, etc.
| Specifications | ASTM B167 B517 / ASME SB 167 SB 517 |
|---|---|
| Outer Diameter | 6.00 mm OD up to 250 mm OD, Sizes up to 12” NB |
| Welded Pipe size | 5.0 mm – 1219.2 mm |
| EFW Pipe size | 5.0 mm – 1219.2 mm |
| Pipe Thickness | 0.3mm – 50 mm |
| Schedule | SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS |
| Form | Round, Square, Hollow, Rectangular, Hydraulic, Coiled, Straight Pipes, “U” Shape, Pan Cake Coils etc. |
| End | Plain End, Beveled End, Treaded Pipe. |
| Type | Seamless / ERW / EFW / Welded |
| Specifications | ASTM B366 / ASME SB366 |
|---|---|
| Size | Seamless Butt Weld Fittings : 1/2″ – 10″ Welded Butt Weld Fittings : 1/2″ – 48″ |
| Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10 |
| Types | Seamless/Welded |
| Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom ASTM A815 Grade S31803 Pipe Fitting |
| Specification | ASTM B564 / ASME SB564 |
|---|---|
| Size | 1/2″ (15 NB) to 48″ (1200NB) DN10~DN5000 |
| Standards | ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc. |
| Pressure Rating ANSI | Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS |
| Connect Type/ Flange Face Type | Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ) |
| Specifications | ASTM B564 & ASME B564 |
|---|---|
| Size | 1/8” NB to 4” NB (Socketweld & Screwed-Threaded) |
| Dimensions | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
| Types | Socketweld Fittings, Screwed-Threaded Fittings |
| Class | 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS |
| Standard | ASTM B166, B466, B408, B425 / ASME SB166, B466, B408, B425 |
|---|---|
| Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Size | 10 mm To 100 mm Dia in 100 mm TO 6000 mm Length |
| Form | Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging Etc |
| Finish | Bright, Polish & Black |
| Specifications | ASTM B168, B443, B409, B424 / ASME SB168, B443, B409, B424 |
|---|---|
| Dimension Standard | MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc |
| Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Thickness | 0.3 mm to 120 mm |
| Finish | Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc. |
| Form | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc. |
| Standard | DIN, ASTM, BS and all International Standards |
|---|---|
| Bolt / Screw Size | M3 – M56 | 3/6″ to 2″ | Custom Sizes |
| Nuts Size | M3 – M56 | 3/6″ to 2″ | Custom Sizes |
| Washers Size | M3 – M56 | 3/6″ to 2″ | Custom Sizes |
| Machine Screws Size | M1.6 – M12 |
| Self Tapping Screw Size | No.2 – No. 14 |
| Length | 3 mm to 200 mm |
| Types | Nuts, Bolts, Screws, Stud Bolts, Washers |
| Specification | ASTM A276 / ASME SA276 |
|---|---|
| Size | Dia 6mm to 300mm (100mm to 1200mm long) |
| Diameter | 5.5 – 400 mm |
| Length | Max 12000 mm |
| Types | Wire, Coil Wire, Filler wire, Welding wire etc |
| STANDARD | WERKSTOFF NR. | UNS |
| Inconel 600 | N06600 | 2.4816 |
| Inconel 601 | N06601 | 2.4851 |
| Inconel 625 | N06625 | 2.4856 |
| Inconel 800 | N08800 | 1.4876 |
| Inconel 825 | N08801 | 2.4858 |
| Grade | C | Si | Mn | Cr | S | Ni |
|---|---|---|---|---|---|---|
| Inconel 600 | 0.15 max | 0.50 | 1.00 max | 14.00 – 17.00 | – | 72.00 min |
| Inconel 601 | 0.10 max | 0.50 max | 1.00 max | 21.0 – 25.0 | 0.015 max | 58.0 – 63.0 |
| Inconel 625 | 0.10 max | 0.50 max | 0.50 max | 20.0 – 23.0 | 0.015 max | 58.0 min |
| Inconel 800 | 0.10 max | 1.00 max | 1.50 max | 19.00 – 23.00 | 0.015 max | 30.00 – 35.00 |
| Inconel 825 | 0.05 max | 0.5 max | 1.00 max | 19.50 – 23.50 | 0.03 max | 38.00 – 46.00 |
| Grade | Pipe Density | Pipe Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
|---|---|---|---|---|---|
| Inconel 600 | 8.0 g/cm3 | 1399 °C (2550 °F) | Psi – 30000 , MPa – 205 | Psi – 75000 , MPa – 515 | 35% |
| Inconel 601 | 8.1 g/cm3 | 1411 °C (2571 °F) | Psi – 30,000 , MPa – 205 | Psi – 80,000 , MPa – 550 | 30 % |
| Inconel 625 | 8.4 g/cm3 | 1350 °C (2460 °F) | Psi – 75,000 , MPa – 517 | Psi – 1,35,000 , MPa – 930 | 42.5 % |
| Inconel 800 | 7.94 g/cm3 | 1385 °C (2525 °F) | Psi – 30,000 , MPa – 205 | Psi – 75,000 , MPa – 520 | 30 % |
| Inconel 825 | 8.14 g/cm3 | 1400 °C (2550 °F) | Psi – 32,000 , MPa – 220 | Psi – 80,000 , MPa – 550 | 30 % |
| Inconel 600 Pipe Manufacturer in Indonesia | UNS N06625 Inconel Seamless Pipes Supplier in Indonesia |
| Welded Incoloy 825 Pipe Fittings in Indonesia | Seamless Inconel 625 Seamless Pipe Fittings in Indonesia |
| Inconel 625 Buttweld Pipe Fittings in Jakarta | 800 Inconel Pipe Elbow Supplier in Surabaya |
| 625 Inconel Reducer Stockist in Surabaya | Inconel 600 Pipe Cap in Bandung |
| Inconel 825 Pipe Bend Dealer in Surabaya | 625 Stub End Price in Indonesia |
| 800 Inconel Flanges Supplier in Indonesia | 1.4876 Inconel Slip on Flange stockist in Lampung |
| Inconel 601 Welding Neck Flange supplier Indonesia | Inconel 825 Blind Flanges Manufacturers in Banten |
| 601 Inconel Lap Joint Flanges in Medan | 800 Incoloy Round Bar in Indonesia |
| UNS N06625 Flat Bar Dealer in Bandung | Inconel 601 Hex Bar in Jakarta |
| Inconel 601 Forged Bar Supplier in Banten | 600 Inconel Forged Fittings Supplier in Indonesia |
| Inconel 825 Forged Elbow Supplier in Lampung | Inconel 800 Coupling Supplier in Medan |
| Inconel 601 Fasteners Distributors in Indonesia | 600 Inconel Bolts Supplier in Lampung |
| Inconel 2.4856 Plates Supplier in Indonesia | 625 Inconel Sheets in Banten |
| Inconel 2.4858 Nuts Supplier in Bandung | 800 Incoloy Filler Wire in Medan |
| Inconel 600 Forged Bushing Supplier in Indonesia | 601 Inconel Supplier in Banten |
| Inconel 625 Welding Wire Supplier in Indonesia | Inconel 600 Forged Union in Jakarta |
Country
Inconel 600 / 601 / 625 / 800 / 825 Pipe applications & uses
Address
